Showing posts with label Laptop Repair London. Show all posts
Showing posts with label Laptop Repair London. Show all posts

Friday, 16 November 2012

HOW WILL MY COMPUTER OPERATE IF IT'S CONNECTED TO A LAN?



For the most part, your computer will operate on a LAN just at as it would without a LAN. You will log onto a disk drive (that is actually a network drive), change directories to the place where your application software is located, and execute your program just as you would if the software were on your hard drive inside your PC. Several things will have to happen, though, in order for you to gain access to your network drive(s):



1) You will have to load and run some kind of driver software that makes your PC able to use the network card plugged into the bus connection inside your PC. This is usually done when DOS loads the driver programs listed in your CONFIG.SYS file.

2) You will need to run the network operating system programs needed to initialize your network card for use by the operating system, identify your PC as a legitimate node on the network, and allow an identified user to log into the network. With Novell Netware, these would be IPX.COM, NETX.COM, and LOGIN.EXE.

3) Your network administrator will have to map specific drive designations to you, grant you rights to access files in the drive and directory, and probably use the capture command to route your print requests to a network printer.

4) You will probably access most of your application software on the network drives with the assistance of a menu program that allows you easy access to your programs and data. Examples could include Novell Main Menu, Direct Access, or Windows. For the most part, everything is the same on a network drive as it is on a local hard drive. DIR gives you a directory of files on your current drive and sub-directory; COPY copies files from one place to another; DEL deletes files; REN renames files. The idea of a network drive is to give you as identical an environment on a network drive as you do on a local hard drive.

 

Thursday, 20 September 2012

How to Easily and Safely Install RAM


How to Easily and Safely Install RAM

Check to see if you have ample light. You may want to have a container to place small screws in. The system unit cover may have small screws and you don't want to lose them.

After you have plenty of work space and ample lighting, prepare your mind as well. Make this and every other adventure of working on your computer educational and fun. Now go over to to familiarize yourself with all components inside the PC. Take the time to study the actual components inside you computer. You'll be glad you did should something go wrong. Follow these steps to install your drive.

Turn off your computer and unplug all peripherals. Take notice of how you unplug or disconnect any devices. Remove the side panel of the tower system or the cover if you have a desktop. Place the panel in a safe place well out of the way. Before touching anything inside the system unit, remove electrical static charge from your body by touching a door knob or any unpainted metal surface.

Remove the new memory from its protective wrapping and locate the sockets to install the new memory chips. Notice the type of retaining clips that hold the chips in place. Remove any old chips you intend to move. Now to be sure you won't damage the chips, ground yourself again to remove any remaining static electricity.